DPA Magazine | Features - The Engineer's Trusted Source of inductry articles

Is Raspberry Pi the victim of EMI?

02/02/2029

Electromagnetic interference (EMI) is the phenomenon of electrical disturbance that can negatively affect electrical circuits, whereas EMC, or electromagnetic compatibility, refers to a particular device or piece of equipment, and its ability to limit the generation, propagation and reception of this unwanted electromagnetic energy.

UV curing and tack free cures

02/02/2029

Sometimes, cured UV adhesives have a tacky or sticky surface, even after being exposed to the correct amount of UV light – due to a phenomenon called oxygen inhibition. However, with a full understanding of the process, manufacturers can achieve tack free cures.

TR Fastenings provides bespoke fastening solution to Tier 1 automotive company

02/02/2029

Faltec Europe employed TR Fastenings to deliver a competitive fastener supply and tooling solution. The company required a bespoke fastening for a new programme it had recently secured with a key global OEM.

A specifier’s guide to fasteners and fixings

02/02/2029

Fasteners and fixings are very often forgotten about in the build chain and are either a last-minute consideration or left to the contractor’s discretion. However, when fasteners are correctly specified from the outset, there are huge benefits down the line.

Hybrid chemistry: Light fixation revolutionises 2C adhesives

02/02/2029

Two-component (2C) epoxy resins are suitable for structural bonding and protective potting. For many industrial applications, the time-lapse before reaching initial strength has been deemed a major disadvantage – until now.

Latest Features from DPA

Is Raspberry Pi the victim of EMI?

UV curing and tack free cures

TR Fastenings provides bespoke fastening solution to Tier 1 automotive company

A specifier’s guide to fasteners and fixings

Hybrid chemistry: Light fixation revolutionises 2C adhesives