Abssac has recently supplied its largest splined shafts to date. Measuring 150mm in diameter, with 8 splines along its 2m length and weighing in at 250kg, the unit is manufactured from EN24T steel. The customer did not have any technical drawings from which we could quote from; the only information available was to be gathered from the broken and distorted sample sent to us after a catastrophic failure at a paper mill. Abssac was successful in being able to replicate the part and deliver it ready to fit into the repaired machine.
As standard, splined shafts are available in 11mm to 46mm in diameter with either 6 or 8 spline formats. A full range of flanged steel or bronze sleeves are available to compliment the splines. Standard lengths of 250,500,1000,2000 and 3000mm are available from stock.