The new THINKY ARE-250 mixer from Intertronics is an industrial non-contact mixer for all your engineering compounds. It mixes, disperses, and degasses your materials in seconds to minutes, in a sealed or lid-less container such as a jar, beaker, syringe barrel, or cartridge. The non-contact mixing principle makes it possible for you to formulate compounds from very small amounts such as 0.5ml to production scales.
The mixer allows the processes of mixing and bubble removal to be carried out simultaneously. It is also a conditioning mixer. You can use it for the mixing and/or bubble removal of ,not only epoxy, but also silicones, conductive pastes, medicines, chemical materials, etc.
You can use the mixer to formulate and mix adhesives, sealants, molding compounds, lubricants, slurries, coatings, inks, paints, abrasives, bio chemicals, cements, medical compounds, cosmetics/personal care materials, detergents, conductive pastes, dental materials, foods, construction materials or any other materials which are hard-to-mix, hard-to-degas, or hard-to-wet.
The THINKY ARE-250 Mixer works by revolving and rotating the container in a planetary manner at various speeds. Centrifugal force presses the material outwards to the inner wall of the container. Other forces cause the material to move downwards in a spiraling direction along the slope of container wall. The material then moves back to the centre of the container and up to the top. As a result, material circulation from top to the bottom generates kneading effects, forcing trapped air out of the material.
Epoxy resin, hardener and aluminium powder can be mixed to form a smooth, bubble-free paste in just 6.5 minutes.
Engineering benefits
· For high viscous, materials with various densities, or dry particle mixing
· Simultaneous process of dispersion and degassing in one batch
· Process in seconds to minutes
· Process in your containers such as jar, barrel, cartridge, syringe or tube
· Remove voids and re-disperse filled materials packed in syringes
· Process from 0.5ml - save valuable material wastage
· Re-mixing of separated materials to prolong shelf life
· Vacuum-less processing, degassing and de-aeration
· No unit cleaning between batches eliminates non-productive work