A hand-picked team of Mitsubishi Alpha microcontrollers was instrumental in guaranteeing global TV coverage of the World Cup, securing the air conditioning in the mobile broadcasting centre, so that both staff and equipment could function at maximum efficiency. Clim Cool Project in Renningen, Germany developed the air conditioning system for the television outside broadcast unit used throughout Germany during the World Cup. Packed with the very latest technology installed by BFE Studio und Medien GmbH, the truck is one of the most advanced outside broadcast units ever built, supporting up to 28 TV cameras and equipped for high-definition digital television (HDTV). In addition to the equipment it has space for a staff of around 18, including audio technicians, video operators and broadcasting directors, all of whom work in the trailer during the broadcasts.
Clim Cool fitted the trailer with a 70kW air conditioning system for cooling, heating, ventilation and dehumidification. It is designed to be equally able to cope with ambient conditions at snow sports events or summer broadcasts from southern regions. While the staff can adjust the temperature of their workroom between 18 and 28°C, the temperature of the air fed into the electronic equipment is automatically maintained at a level between 10 and 18°C. The temperature must be neither too low, because this could cause condensation and shorts on the electronic circuit boards, nor too high, which could result in defects caused by overheating. When the outside temperature is below 10°C the system first switches into heating mode until the temperature sensors register 18°C, then the heating is cut out and the equipment is cooled. When the outdoor temperature is above 10°C cooling mode is activated immediately.
The air conditioning has a total of eleven heat exchangers (one for each cooling station) and seven compressor units. Inside the trailer every last cubic centimetre of available space is used, so the air conditioning components must also all be as small as possible, powerful, reliable, and quiet enough not to interfere with the broadcast.
The entire air conditioning system is controlled and monitored by seven Mitsubishi Alpha 2 micro controllers using two-point control. The engineers at Clim Cool Project choose the Alpha 2 because each unit supports up to 28 I/O points, including eight analog inputs. These are needed to connect temperature sensors and setpoint generators for each cooling station and two pressure transmitters for each compressor. The outdoor temperature is measured with an additional sensor, the values from which are daisy-chained through to all the controllers.
There were a number of other criteria that influenced the controller choice: To begin with, the Alpha 2 is specified for operation in an ambient temperature range from ‑25 to +55°C, which was very important for the wide range of conditions that the outside broadcast unit is to be used in. The engineers also wanted to distribute the air conditioning control tasks across several smaller controllers to increase overall reliability.
Another big advantage is that all the open and closed loop control processes are run within the Alphas, which helps to keep the wiring and the number of terminals to a minimum.
The Alpha 2 micro controller closes the gap between individual components like relays and time switches and a full PLC. It delivers a high level of functionality, reliability and flexibility at a very reasonable price. The Alpha can process up to 200 function blocks in a single program and each function (time switches, counters, analog signal processing, clock/calendar function etc.) can be used as often as required by all programs.
Clim has a track record of similar projects dating back ten years or more, including a Formula 1 team’s VIP paddock tent. It has pushed the technological boundries with each new project, which along with advances in broadcast systems has helped make interference and breaks in transmission of live events event coverage just a dim memory.