Our Customers are always looking for the right solution to a specific motion problem. To meet their demands, Delta Line Europe of Whitstable, Kent, offers a variety of motion component solutions using products which offer the best technological solution, quality and reliability at an affordable price. Delta Line Europe has originated from over 20 years’ experience of the Delta line organisation in Milan, Italy. Its strategy is to provide sales, marketing and technical support activities in the supply of motion component solutions, sub 400W, to key market sectors including...
• Medical
• Factory automation
• Semi conductors
• Commercial aviation
• Security and access
• Robotics
• Instrumentation
... and any area that needs the use of specialised electronic, electromechanical and mechanical devices.
To ensure it keeps up with progress and meets market demands, the company has created a distribution network with offices spanning Europe to ensure its customers requirements are responded to as quickly as possible from the closest source. From these distributors, a wide variety of products are available for use either as a stand alone motion product within an application or as a motion system to solve a specific motion requirement. Maximum efficiency and speed of response is further ensured through the use of a computerised system to centralise all commercial, technical and logistic activities.
Products
Low inertia DC motors: ironless rotor motor technology with cylindrical skew winding using AINiCo or rare earth magnets and precious metal or a copper-graphite commutation. These offer a maximum rated continuous torque from 0.46 to 115 mNm and continuous power in the range 0.5 to 90W. The motors are available in a range of sizes from 8 to 35mm and offer such features as high acceleration, short mechanical time constant and low contact resistance which allows low starting voltage.
Brushless micromotors: motor technology using permanent AINiCo or rare earth magnets with a high ratio power/volume. Available in sizes from 10 to 33mm, these offer a maximum continuous torque from 1.2 to 25.8 mNm, with speeds up to 76,000 rpm and a maximum continuous power range from 2 to 30W. The MTBF is high - 30,000 hours at 10,000 rpm, and there is the possibility of adding hall effect sensors to the motors.
Low inertia stepper motors: high performance rare earth disc magnet technology. These motors provide a holding torque from 1.85 to 1.06 Nm and a high ratio of power/volume. In addition to high angular resolution in microstep mode, these are capable of accelerating to 265,000 rad/sec2 and reaching speeds of 10,000 step/sec. Sizes are from 10 to 90mm.
The spur gear and planetary technology gearboxes have a large range or dynamic torque from 12 mNm to 10 Nm and are available in a number of ratios. Diameters range from 10 to 40mm and the mechanical components are designed such as to have an acceptable noise level. A new range of spur and planetary geared motor series are introduced for demanding applications with their low noise and high torque capabilities.
Digital linear actuators: despite being low cost, the actuators offer a linear step resolution from 0.0005 to 0.0040in and are in unipolar and bipolar construction. Offering from 1.7 to 6W of power per winding, linear forces are from 103.9oz (28.9N) to 28lbs (124.6N).
Stepper-brushless motors: these hybrid stepper motors have a holding torque from
17,5 mNm to 30 Nm and range in size from 20 to 110mm diameter. Flexible enough to be customised, they offer a good ratio of quality/price.
DC brushless servo-motors motor technology using rare earth or ceramic permanent magnets. With a continuous torque from 50 to 400 mNm, these servo-motors are capable of speeds up to 8000 rpm and a maximum continuous power from 40 to 250W. Available in 42 and 57mm diameters and a range of lengths, features include hall sensor feedback and customisation flexibility.