The integrated simulation mode and automatic logic check function assist users already when designing safety circuits. Using the simulation function, all of the logic is tested at the PC without requiring any additional hardware or without having to use a pre-installed machine. As a consequence, possible errors are corrected before the machine is actually commissioned, therefore reducing project execution times.
The safety logic configured with a few simple mouse clicks reduces wiring costs, and subsequent modifications can be implemented with minimum associated costs. Once the safety logic has been designed and tested at the PC, it is downloaded into the configurable PSR-Trisafe safety module using a standard USB cable.
The module is just 67.5 mm wide and can evaluate up to 20 safe input signals. Further, the device has four integrated safe outputs (up to Cat. 4) as well as cycle and signalling outputs and outputs that switch with respect to ground.