Item has introduced a new ball joint that interconnects Line-8 profiles at any chosen angle. The units can be fitted to the end, or to the side flank of any Item profile with an 8mm slot. They will secure against a 2Nm moment, and thus provide a means of securing lightweight equipment requiring infinite angular adjustment to any frame. One option is provided with a clamping handle for mounting monitor screens, cameras, and lights, or anything requiring frequent adjustment.
Alternatively, the simple screw-secured version might be used where adjustment is required less frequently. A typical example is the mounting of a ball joint on both ends of a strut to provide easy fixed bracing to any frame. This is possible even where the frame members themselves run at irregular angles and in different planes to each other.
Both ball and the two socket-body halves are made of die-cast aluminium. Tightening the clamping screw has the effect of heavily spring-loading the ball and socket joint. One notable feature is that the clamping force can be adjusted such that it is possible to adjust the position of the joint by applying a little manual effort without having an impact on the ability of the system to resist further movement.