The new TEKO ‘OV-IP’ enclosures have been designed for small RF or infrared remote control devices which are fitted on a keyring.
These modern and highly tactile cases are manufactured using the latest dual shot moulding technique, combining grey ABS with black ‘soft-touch’ rubberised TPE. Each case consists of a single moulding which is folded over at the key ring end and secured by two self tapping screws, thus providing a high protection class of IP65.
Four standard models are offered with one, two, three and four rubberised push buttons. Inside, there is room for a single PCB which can be located on the ribs provided. Where an LED is fitted to the PCB to indicate operation of the unit, it can be viewed through a Ø 1.5 mm indicator lens which is fitted in the top section. There is also room for a PCB mounted type CR 2032 battery cell.
‘OV-IP’ cases have external dimensions of 56.8mm x 44mm x 14.5mm and include a location bar at one end for fitting the key ring or a neck chain.
TEKO can also supply these enclosures with silk-screen printed legends and logos. The cases can also be moulded in alternative colours.