Mountable IEC device plug with integrated device protection switch

Wide range of mounting options 

The new DG11 is available for almost every mounting variant with snap or screw mounting. The latter can be done in front mount or rear mount version. In addition, holes for the screws are available in either a vertical or horizontal arrangement. 

TA35: wide assortment 

The DG11 includes a 2 poleTA35 circuit breaker which provides the function of a device switch as well as thermal overcurrent protection. The thermal protection can be done with bimetal mechanism for only one or two poles and is available in finely graduated rated currents from 0.05 A to 15 A. The rocker switch is available illuminated or unilluminated in a variety of colours and markings. 

IP protection 

In addition to the IP40 protection in all versions, the DG11 is available in a version with IP67 protection into the appliance. The use of the device in harsh dust or splash water environments is ensured by a protective cover for the circuit breaker as well as sealing beads and four sealing screws for tight fastening of the frame. 

Cord retention 

The V-Lock cord retention system can be plugged in to IEC 60320 at 10 A and 16 A. With the VLock system the power connector is equipped with a latch that interlocks with a special notch in the inlet and thus reliably prevents the cord from being pulled out.

Coming soon with filter

In the coming months SCHURTER will present the DG12, a filtered version for increased EMC requirements.

For more information: https://uk.schurter.com/en/datasheet/DG11