HBM’s hot-curing EP150 epoxy resin is supplied ready-for-use and is applied directly using a brush integrated in the screw cap. The adhesive can also be sprayed in mass production applications, for example, in transducer manufacturing.
EP150 is a one-component resin, unlike most other epoxy resins that require additional time to mix different components before they can be applied.
It has very low viscosity and is very effective. Only a small amount is applied which forms a very thin, uniform layer of adhesive that properly bonds strain gauges.
EP150 is used at temperatures ranging from -70°C to +150°C. Two different packages are available: 2 x 30ml (1-EP150) and 10 x 20ml (1-EP150-GP).